The anti-pump relay provides an important function feature in control circuits. Without the anti-pump function, if the user connected a maintained contact in the close circuit, and the circuit breaker were closed into a fault current, the protective relays would cause an immediate trip action, but the maintained contact in the close circuit would initiate […]
What is SF6? It’s an inert, colorless, odorless and non-flammable gas. Sulfur hexafuoride is about 5 times denser than air, meaning it’s heavier. If you were to fill a fish tank with SF6, you could treat the gas as if you were pouring water into a fish tank. It will collectively stay within the fish tank. It is […]
The power company, or you, decide you need to de-energize a circuit. You rack out and remove your trusted 1960’s vintage breakers, of course you are suited up in the proper level PPE (Personal Protective Equipment). You then dust off your vintage ground and test device and install it in the cubicle. Connect the motor […]
Good Old, Quality H2O! Recently, the temperatures have been rather cold in the Washington DC area. We hit a week of temperatures below 20°F. Yes, I know; not very cold when compared to our northern states or Canada. But it still brought up some very good talking points. Do you test equipment below 0°C (32°F)? […]